Customers can avail from us a high quality range of Textured Protective Paint. These wall finish are manufactured using high grade raw materials that are procured from the most eminent vendors of the market.
Fine Tex is a fine textured protective Wall Finish ideal for External and Internal surfaces. Highly resistant to alkalies and adheres perfectly to any type of surface, even in adverse climatic conditions it provides an impervious and elastic coating.
Mix vibgyor fine Tex well before application. vibgyor fine Tex should be applied with block brush or woolen roller and use a textured roller to create desired effect. The product may be diluted with 5% of water depending on climate condition and surface. The product is rainproof after six hours of application and is completely hard dry after 48 hours at a temperature of 20ºC. Fine Tex may be used for the decoration and protection of External and Internal cement plasters, gypsum, P.O.P and concrete surface. It is also recommended for reviving old surface.
New, smooth, regular and non-absorbent plasters do not need any special preparation. Old, flaking, peeling off and loose surfaces should be first scraped and then treated with a coat of vibgyor Sealer, P.O.P, Gypsum and very absorbent surfaces should be first treated with vibgyor Sealer, mixed with water @ 1 : 3 (sealer one part, water three parts) and applied by a brush. Broken edges, undulations, and uneven surfaces can be rectified by using a paste made of vibgyor concrebond - 250 surface improver mixed with ordinary Portland Cement 1: 1 by weight along with silica sand.
Offered by us is a exclusive range of Spray Texture Paint to our esteemed patrons. Spray Tex wall finish is a premixed pigmented decorative thick textured wall finish that is composed with acrylic polymers/ resins, quartz powders, marble chips, natural aggregates. The thickness of spray Tex varies from 1.4- 2 mm and it hides minor cracks imperfection of plaster, uneven patches and can be applied in bubble and compact both in single or multi shades. It is good for exterior and interior and is available in a variety of colors.
Technical Characteristics :
Spray Tex is a thick wall coating that is highly resistant to alkalies and wear and tear. Copolymer adhesive powers make them ideal for virtually any kind of substrate.
Spray Tex may be used for the decoration and protection of external and internal cement plaster, gypsum or concrete surface. It is suitable for housing societies, apartments and commercial complexes.
Spray Tex should be applied onto the surface two coats with brush and followed by spray gun specially designed for this kind of application. To get compact effect, plastic trowel to be applied in semi dry condition. The material is rainproof after 8 hours of application and hardens completely within 48 hours, at a temperature of 20ºC.
New, smooth and regular plasters do not need any special preparation. Old, flaking, P.O.P, Gypsum surfaces or very absorbent plasters should be first brushed down and then treated with a coat of vibgyor sealer, mixed with water in the ratio 1 : 3 (sealer one part, water three parts) and applied by a brush. Broken edges, undulations, loose and flaky surfaces can be rectified by using a paste made of vibgyor concrebond - 250 surface improver mixed with ordinary Portland Cement in the ratio 1 : 1 with silica sand.
Offered by us is a prominent range of Texture Paint to our esteemed patrons. These offered paints are premixed pigmented decorative thick textured wall finish made of polymers, quartz powder, acrylic powder and marble chips. It signifies a rough cast look with thickness of 1.5- 2 mm. We offer these paints in various colors at market competitive prices.
Below are the other exclusive features: